Friday, June 7, 2019
Sections of the Library Essay Example for Free
Sections of the Library Essay1. Acquisition Section The objectives of the Acquisition argon Selection , Ordering and Accessioning of defends in Accession Registers. The library procures those books which argon recommended by the teachers / Scientists of the university. besides Chief Librarian also takes initiative in selecting books of general nature and text books. The list of recommended books is placed before the Primary Purchase Committee (PPC) merely for selection of books and periodicals. Orders are placed when the PPC approves the list of books and journals. 2. Processing Section Processing Section undertakes two vital functions, viz. , (a) Classification and (b) Cataloguing (a) Classificaton Class numbers are given to the books according to the Dewey decimal Classification Scheme (DDC). (b) Cataloguing earmarks are catalogued according to Anglo American Cataloguing Rules -II (AACR-II) . For each book three entries are prepared. 3. Circulation Section The functio n of the circulation character centers round issue and return of the books. The lending period without fine is one month. The over due fine rupee one per day is charged on every book issued beyond the lending period. 4. Current Periodical Section Current Periodical Section is located at the ground floor.In this theatrical role , journals which are subscribed to the library for the current year are displayed. 5. Reference Section -Reference books are not issued , but readers may consult it within the expound of the Library. The reference books are shelved in three polar Halls. Reading Hall I For current information. Reading Hall II For books on Agriculture and assort subjects. Reading Hall III For books on Home Science 6. Text Book Bank Section There is a separate Text Book Bank ( TBB ) Secton in the Library. Books from TBB are issued for one semester against a nominal charge of Rupees 2 ( two) for each book.7. Reprography Section The readiness to photostat is also availab le in the library against a nominal charge of 75 paise per document. 8. Exhibition-cum-Conference Section In this prick collection of books / documents of a few eminent scientists are available . Informations regarding different courses inside and outside the country are also found here . 9. Stack Areas The library is proud of having large stack areas. Side by side, the facility for reading is also available in this stack room 10. Back Volume Section A large number of bound old journals are available in the Back Volume section.These journals arearranged alphabetically by title. 11. Computer Unit Computer unit is the latest addition . Preparations are about to develop this section. SectionAbout The Stacks The Dewey Decimal System (000. 00 ABC)The stacks are generally considered the NON-FICTION section of the library. Here, books are classified and arranged by number in the Dewey Decimal System. The general categories for Dewey are below 000 Generalities 100 Philosophy psycholog y 200 Religion 300 Social sciences 400 Language 500 graphic sciences mathematics 600 Technology (Applied sciences)700 The arts 800 Literature rhetoric 900 Geography historyThis is not a section students browseit is difficult to locate a book if you dont know its number ReferenceREF The second Dewey sectionusually not for general checkout. OversizedOvzThis is the third Dewey section, where books that are to a fault large for the shelves in the stacks are located. In-house readers usually know that the Guinness Book of World Records is on the first shelf of this section.BiographyB 92The biography section is placed just before fiction. Here, you find books on a specific person, organized alphabetically by last name. Short StoriesSCLocated between Biography and legend is the Short Story Collection.Books that are only made up of short works are located here. FictionFThe fiction section is alphabetized by authors last name. Books by each author are then organized by title. Graphic N ovelGrNvlThis collection is the Not for verification collection. We try to keep a variety of comics, manga, and special graphics for your in-house use. If youve never read something like this, ask a librarian for suggestions Different materials used in the library 1. magazines 2. newspapers 3. reference books 4. encyclopedia 5. dictionaries 6. books films 7. computer terminals 8. audio-visual equipment circulation books.
Thursday, June 6, 2019
Ideas of Ethnicity from the Concept of Nation Essay Example for Free
Ideas of Ethnicity from the Concept of Nation EssayIn order to pop off this question, it is necessary to try to explain some of the phrases within it. Multi-culturalism, state of matter and civic are all images that intertwine in different ways. Ethnicity and civic ideas in the nation can exist together and angiotensin-converting enzyme incorporates the other. Multiculturalism is the civic nation in so far as a nation is a modern, liberal creation but as a general rule, the states attempt to assimilate immigrants and internal minorities into the culture of the predominant ethnie (multi-culturalism) have been met with little success. For example, the state has managed to establish a national system of education and compel most minorities and immigrants to put their children through its uniform schooling system but on the otherhand, modern nations are civic and heathenish which constitutes multi-culturalism. Modern nations are both civic and heathenish and therefore multi- cultural in theory however we shall see that multi-culturalism as a theory does not buy the farm to its full definition. The term,Multi-cultural for Kymlicka represents a broader way to encompass a wide range of non-ethnic social groups which have been excluded or marginalised from mainstream society.1 For the purposes of this essay it means multi-clturalism which arises from national and ethnic difference. ENTER PG NO Another form of multi-culturalism is when different cultures insist that all citizens have the same relationship with the state which is a model that allows for a arcdegree of diversity in terms of language and culture rather than seeking to assimilate different ethnic groups. (Wieviorka 1998. ) The theory of the national state has generally anticipate a civic form of nationalism.The ideal of the sovereignty of the people has always had a clear vision of the nature and boundaries of the people who make up the citizens of the state. When one brings the idea of ethni city into the debate, a conflict arises from the internal contradiction at the heart of the national state between a universal conception of citizenship with its uniform rights and a conception of the people and the ethnic basis where national minorities demand their own rights as members of a community that shares a history which marks themselves off from the dominant ethnie.Thus causing a difficulty in forming a multicultural nation. It is often assumed that ethnic communities in the nation breeds exclusiveness and intolerance to the concept of nation however there is no one to one relationship between ethnic nationalism and exclusiveness for some ethnic groups live peacefully alongside one another such as the Catalan and Czech movements. (Smith. )
Wednesday, June 5, 2019
Any Given Friday Essay Example for Free
Any Given Friday EssayOn any given Friday night any athlete could be injured. It is not wished upon any athlete exactly accidents happen. On a particular Friday our 17 year old athlete suffered an anterior cruciate ligament or ACL teardrop while contributeing football for his superior school. The athlete was trying to make a quick cut and when he planted his left knee the ACL popped. The athlete himself was able to hear the pop it was so loud. Immediately the athlete went to the ground grabbing his knee. He was not able to put weight on left leg. There was a noticeable amount of lump while he was being carried off the field.The athlete do the trip from the football field to the local cavorts clinic for an MRI and to consult with the orthopedic surgeon virtually options and severity. While the athlete was waiting on the MRI results in a couple of days he was told to perform what is known as RICE, or informality Ice Compression and Elevation. (webmd.com) These combination s butt help with inflammation and pain. Once the doctor got the MRI back, he was able to tell that there was a complete tear of the ACL.The doctor was now telling the athlete and his parents their options of surgery or no surgery and probably not playing again and having more issues down the road. evidently they chose surgery to repair the torn ligament. Once the athlete was complete with surgery the rehabilitation process begins. Most doctors recommend a seven month rehabilitation cash advance. Each week must be completed before moving on to the next step of rehabilitation. It is really up to the athlete and how serious and how sullen he pushes himself, all while trying not to overdo it at the same time. Here is an example of the seven month long rehabilitation progressionWeeks 1-2Range of interrogation exercises can begin immediately after surgery. The initial focus is to regain full extension (the ability to fully straighten) of the knee. In general, inflexion (ability to bend) is much easier to regain than extension. Patients will work with visible therapists to work on gait training (walking), gentle strengthening, and aerobic work. I like to get patients on a stationary bicycle as soon as possible after surgery as this improves strength, motion and aerobic activity.Weeks 3-6Work is continued with physical therapy. As motion increases, emphasis is shifted to strengthening. Specifically balance and proprioceptive exercises. Once normal motion has been achieved, some sport-specific activities can be started. Before beginning these activities, motion must be near normal and the swelling in the knee gone.Weeks 7-12Early sports activities can be started and patients can often begin light jogging, pass outdoors, and pool workouts. Side-to-side, pivoting sports such as basketball, soccer and football must be avoided. Toward the end of this phase, some athletes can begin shuttle runs, lateral shuttles and jumping rope.Months 4-7 act progression with sp orts specific activities. This phase of rehabilitation is often the most difficult, because patients may have a knee that feels normal, but is not ready for the stresses of some sport activities. Emphasis of rehabilitation should be on sport simulating activities. These will include figure-of-eight drills and plyometric, and over time will include sport drills. For example, a tennis role player may start light hitting, a soccer player some controlled dribbling, etc. (about.com) After completing all of these steps the athlete will be closer to getting back on the football field. There are a few other issues that need to be considered before he can be released to participate in full contact football. Making sure that the left knee is fully functional without any give or play in the knee. The surgeon will also have to give the ok and will probably fit the athlete for a special brace made just for him. Once the release is given by the surgeon, the athlete can then start to participate in full contact football.ReferenceCluett, Jonathan. replacement After ACL Surgery. About.com Orthopedics. Medical Review Board, 4Oct. 2010. Web. 27 Sept. 2012. http//orthopedics.about.com/od/aclinjury/p/rehab.htm. Healthwise. ACL Injuries-Topic Overview. WebMD. WebMD, 4 April 2011. Web. 27 Sept. 2012. http//www.webmd.com/a-to-z-guides/anterior-cruciate-ligament-acl-injuries-to
Tuesday, June 4, 2019
Non Destructive Testing In The Aerospace Industry
Non Destructive interrogatory In The Aerospace IndustrySince several old age, technology has been improved tremendously and is still in a need for advancement referable to the increasing growth of demands. In todays economy structures must remain for operation for such longer period than origin aloney anticipated. The ageing effect on these structures is comme il faut signifi screwingt. Non-destructive test(NDT) is a wide group of analysis techniques utilize in science and industry to measure the properties of a material, voice or system with discover advert termsBecause NDT does not permanently alter the article being inspected, it is a highly-valuable technique that dirty dog save both money and time in w be evaluation, troubleshooting, and research. Common NDT methods includesupersonic,magnetic-particle,liquid-penetrant,radiographic andeddy-current testing. NDT is a commonly-used tool inforensic engineering,mechanical engineering,electrical engineering,civil engineer ing,systems engineering,aeronautical engineering,medicine, andart.(3) The development of Non destructive testing examines the techniques to insist the conditions of these structures and these developments are focused on extending the cost of maintenance of the existing structures.HistoryIt may be said that NDT has been used from ancient times. The audible ring of a Damascus sword blade would show the indication of the strength of the metal in combat. This technique was also used by the early blacksmiths. They used to heed to the ring of different metals being shaped. The same technique was also used by early bell makers. Visual testing had been used for m whatsoever years for a wide range of exercises. Heat sensing was used to monitor thermal changes in materials and sonic tests were performed years ago(1).NDT by far is a opthalmic testings which is the oldest mankind testing, this was used for visual checking knifes. The for the graduation time use of NDT was through with(p) by a English man S.H.Saxby . who used compass for finding cracks in shot for hire pipes in 1868.With a long established history in non-destructive testing (NDT), producing its first UV meter in the late 1960s (as Levy westernmost Laboratories), AST is the market leader with the Levy Hill MkVI meter. NDT is well known as a part of industrial procedures, but it is also of importance in examinations of a more general interest in everyday life. In the aerospace industry, NDT can make the difference between life and death. Aircraft lots are inspected before they are assembled into the aircraft and past they are periodically inspected through stunned their useful life. Aircraft parts are designed to be as light as possible while still acting their intended function. This generally means that components carry very high loads relative to their material strength and small disfigures can cause a component to fail. Since aircraft are cycled ( rigorous and unloaded) as they fly, land, t axi, and pressurize the cabin, many components are prone to fatigue cracking after some(a) length of time. Even parts that are loaded well below the level that causes them to deform can develop fatigue cracks after being cycled for a long time. Cracking can also come on due to former(a) things like a lightning strike. Aircraft have some protection against lightning strikes but occasionally they occur and can results in cracks forming at the strike location. The historic development of NDT is outlined for each technique.The second oldest method was the Acoustics it has been used by ancient time when man started making the pottery vessels.Table1. Table below shows a magnetic dip of some of the key events in the chronology of NDT. (1)YearChronology of Early Key Events in NDT1800First thermography observations by Sir William Herschel1831First Observation of electromagnetic induction by Michael Faraday1840First infrared image produced by Herschels son, John1868First reference to magnet ic particle testing reported by S.H. Saxby, by observing how modify gun barrels affect a compass1879Early use of eddy currents to detect differences in conductivity, magnetic permeability, and temperature initiated by E. Hughes1880-1920Oil and whiting technique, ancestor of present-day penetrant test used for railroad axles and boilerplates1895 roentgen rays discovered by Wilhelm Conrad Roentgen1898Radium discovered by Marie and Pierre Curie.1922Industrial Radiography for metals real by Dr. H.H. Lester.1927-28Electric current induction/ magnetic field staining system true by Dr. Elmer Sperry and H.C. Drake for the oversight of railroad track.1929Magnetic particle tests/ equipment pioneered by A.V. clear and F.B. Doane.1930Practical uses for gamma radiography using radiumwere demonstrated by Dr. Robert F. Mehl1935-40Penetrant techniques developed by Betz, Doane , and deForest1935-40Eddy current developments by H. C. Knerr, C. Farrow, Theo Zuschlag, and Dr. F. Foerster1940-44Ul trasonic test metod developed in United States by Dr. Floyd Firestone1942First Ultrasound flaw detector using pulse-echo introduced by D.O. Sproule1946First portable ultrasonic thickness measuring instrument, the Audigage, was introduced by Branson1950Acoustic emission introduced as an NDT method by J. KaiserMid 1950sFirst ultrasonic testing immersion B and C scan instruments developed by Donald C. ErdmanFrom the late 1950s to present, NDT has seen many developments, innovation, and growth. The roots of non-destructive testing began to take form prior to the 1920s. In the 1920s there was an awareness of some of some of the magnetic particle tests, the visual test and also X-radiography. Prior to World War II, design engineers were content to rely on unusually high precaution factors which were usually built or engineered into many products. In addition, there were a significant number of catastrophic failures and other accidents relating to product inadequacies that bought the conc ern for system and component quality to the forefront. (1) land History of Individual TestingsMagnetic Particle Test Saxby used a magnetic compass to locate the defects and in homogeneities in gun barrels in 1868. Herring in 1879 obtained a patent in United States for the defection of defects in railway lines using a compass needle. weigh studies were carried out by A.V. de Forest in 1928 and 1929 of the use of magnetic particles for non-destructive testing of ferromagnetic materials. In 1936, Unger and Hilpert described in a patent in Germany at where the inspection of aircraft engine parts, engines for fatigue cracks are developed rapidly and the magnetic particle testing was made mandatory. The real breakthrough for magnetic particle testing came, in 1960s these methods was further greatly developed by C.Betz.Radiography Wilhelm.Conrad. Roentgen discovered X rays in 8 November 1895 when it was observed by him that light fixture glow of crystals on a table come up the cathode r ay tube. Later the penetrating rays were characterized systematically which are emitted by cathode ray tubes. These represent the very first radiographs taken in 1896. He conducted a test on his own hunting rifle. Radiograph of the rifle showed some defects in the material and was the start of industrial radiography.Penetrant Test It is a undecomposable and effective method of examining place areas for defects, cracks and discontinuities. Rubbing of carbon black on glazed pottery is one of the early surface inspections. Later on in 1940 magnetic particle method was introduced which is more sensitive. Many of the earlier developments were carried out by Magnaflux, IL USA. In 1942 it introduced Zyglo system where the fluorescent soils were added to the liquid penetrant. The methods were formerly called The oil and whiting method and were used by the huge locomotives in the beginning of the 20th century.(13)Ultrasonic testing Richardson proposed Echo ranging detection of objects at sea in 1912. Later, Lavengin developed a source of ultrasonic waves by using the piezoelectric effect with quartz crystals between steel plates. prox on experiments was carried out by Boyle and by Wood by using quartz piezoelectric transducers. The most simple and quick method came up in 1940 by Firestone. The method avoided many of the problems which were associated with standing wave formation. Then in 1942 Firestone was the first to use his own method for the sonar. The two German brothers H and J. Krautkramer did a lot of research of method and contributed for the development of method. Since their time method has gone through several phases of development.Eddy Current Test Jean-Bernard Leon Foucault is generally credited with the first clear demonstration of eddy currents, by showing that electrical currents are set up in a copper disk moving in a non uniform magnetic field. Hughes is considered to have been the pioneer in using Eddy currents to inspect the metals. Eddy curre nts are also known as bring forth currents which can only exist in conducting materials.(13)The use of NDT methods took place during the Second World War started from the testings of submarines and airplanes. During these years the use of NDT is seen in the inspection of nuclear advocator plant components, pressure vessels and car parts.Aim To investigate the use of divers(a) NDT methods in industry.ObjectivesTo Conduct research on NDT and its applicationsTo identify key components of an aircraft, where likely ruffian of crack is high.To test the components with appropriate NDT methods.To perform penetrant test to identify the cracks in a gear.Initial PlanAs the project initiates with the major task of carrying out the background reading and researching, great amount of time has to be involve to collect information about project. A great deal of time has been worn out(p) on background reading. Project requires thorough knowledge on NDT in aerospace and its classification. A de tailed background reading has been done to lowstand the concept of NDT. Background reading has also been done on different types of NDT testings and its classifications. A detailed arena has been done on the history of NDT.Background ReadingNon Destructive Testing (NDT)Non-destructive testing is the process by which materials, components or assemblies can be inspected without affecting their ultimate serviceability. It offers some important advantages over destructive testing processes such as mechanical testing. A destructive test must necessarily be on a sample basis. This is acceptable in many cases to check that a batch of material is within specification, for example, or as a sample check on a large number of identical components. But a sample destructive test may not be feasible for a small number of high value components and in critical cases a 100% inspection may be required. Because of this, one key role of NDT is in assuring the quality of many manufacturing processes.ND T can also be used to test components which have been subjected to service conditions. A welded structure can be inspected to detect fatigue cracking. NDT results can further be used to aid decisions on the need for and timing of repairs. Suitable techniques, correctly applied, can be used to measure the depth of a fatigue crack. This, coupled with knowledge of the system stresses, the hardness of the material and the fatigue crack growth rate, can be used to determine if a cracked component can be left in service until the next planned overhaul period.These twin roles of NDT ensure that the technology will continue to play a fundamental role in materials testing.Aircrafts are designed to withstand a certain amount of damage from cracking and corrosion without cause for concern, and NDT inspectors are trained to find the damage before it becomes a major problem.The rigorous process used to design aircraft either allows for a certain amount of damage to occur before a part fails, or in many cases, a part can fail completely and performance of the aircraft will not be affected. The job of the NDT inspector is to find the damage while it is within acceptable limits.(5)Role of NDTNon destructive testing can be taken place at any transportation industry. The main offer is to consider the over view of all the terms of NDT and its applications and also to consider research on the optical methods. This is considered to be one of the important terms in the project. Another term is to do research on the optical methods which are implemented on the aircraft parts. (12)Types of methodsThe number of NDT methods that can be used to inspect components and make whether the measurements are large and continues to grow. Researchers continue to find new ways of applying physics and other scientific disciplines to develop better NDT methods. until now, there are six NDT methods that are used most often. These methods are visual inspection, penetrant testing, magnetic particle testing, electromagnetic or eddy current testing, radiography, and ultrasonic testing. These methods and a few others are curtly described below. (12)Visual and Optical Testing (VT)Visual inspection involves using an inspectors eyes to look for defects. The inspector may also use special tools such as magnifying glasses, mirrors, or bore scopes to gain access and more closely inspect the subject area. Visual examiners follow procedures that range from simple to very complex. The teaching nookie Visual testing is the use of reflected or transmitted light from test object that is imagined with the human eye or other light-sensing device. VT finds its application in many industries ranging from raw materials to finished products and in-service inspection. VT can be inexpensive and simple with minimal training required. It has broad scope of uses and benefits. However VT can only evaluate surface conditions. Also effective source of illumination is required. (1)Penetrant Testing (PT) Test objects are coated with visible or fluorescent dye solution. Excess dye is then removed from the surface, and a developer is applied. The developer acts as blotter, drawing trapped penetrant out of imperfections open to the surface. With visible dyes, vivid colour contrasts between the penetrant and developer make bleed out easy to see. With fluorescent dyes, ultraviolet light is used to make the bleed out fluoresce brightly, thus allowing imperfections to be readily seen. (6) turn1 see to it illustrating a simple Penetrant testing (8)The principle privy PT is that a liquid containing visible or fluorescent dye is applied to the surface and the fluid enters the discontinuities by capillary action. PT finds its application in virtually any solid non-absorbent material having uncoated surfaces that are not contaminated. PT is relatively easy and materials are inexpensive. It is super sensitive and very versatile. Also minimal training is required. Discontinuities can only be found on the surface. The surface condition must be relatively smooth and free of contaminants. (1)Magnetic Particle Testing (MT)HYPERLINK http//www.ndt-ed.org/EducationResources/CommunityCollege/MagParticle/cc_mpi_index.htmThis NDE method is accomplished by inducing a magnetic field in a ferromagnetic material and then dusting the surface with iron particles (either dry or suspended in liquid). Surface and near-surface imperfections distort the magnetic field and concentrate iron particles near imperfections, previewing a visual indication of the flaw. (6)Figure2. Figure illustrating the basic concept of Magnetic Particle Testing (9)The principle behind MT is that the test particle is magnetise and fine ferromagnetic particles are applied to the surface, hence aligning at discontinuity. MT finds its application in all ferromagnetic materials, for surface and subsurface discontinuities. It can be used in large and small parts. MT is relatively easy to use. Equipment and material i s usually inexpensive. MT is highly sensitive and fast compared to PT. However in MT only surface and a few subsurface discontinuities can be detected. The test can be only done on ferromagnetic materials. (1)Electromagnetic Testing (ET) or Eddy Current TestingElectrical currents are generated in a conductive material by an bring on alternating magnetic field. The electrical currents are called eddy currents because they flow in circles at and just below the surface of the material. Interruptions in the flow of eddy currents, caused by imperfections, dimensional changes, or changes in the materials conductive and permeability properties, can be detected with the proper equipment.Figure3 Figure illustrating Eddy Current Testing (10)The principle behind ET is that localised electric fields are induced into a conductive test specimen by electromagnetic induction. ET finds its application in virtually all conductive materials. All conductive materials can be examined for flaws, metallu rgical conditions, thinning and conductivity. ET is quick, versatile, and sensitive. It can be no contacting. Also it can be easily elastic to automation. However variables must be understood and controlled. (1)Radiography (RT)HYPERLINK http//www.ndt-ed.org/EducationResources/CommunityCollege/Radiography/cc_rad_index.htmRadiography involves the use of penetrating gamma or X-radiation to examine parts and products for imperfections. An X-ray generator or radioactive isotope is used as a source of radiation. Radiation is directed through a part and onto film or other imaging media. The resulting shadowgraph shows the dimensional features of the part. Possible imperfections are indicated as density changes on the film.Figure4 Figure illustrating the basic principle of Radiographic Testing (11)The principle behind RT is that a radiographic film is exposed when radiation passes through the test object. RT finds its application in most material, shapes and structures. RT is the most wid ely used and accepted volumetric examination. RT can used only on limited thickness based on material density. Also there is a possible threat of radiation hazard.(1)Ultrasonic Testing (UT)HYPERLINK http//www.ndt-ed.org/EducationResources/CommunityCollege/Ultrasonics/cc_ut_index.htmIt uses transmission of high-frequency sound waves into a material to detect imperfections or to locate changes in material properties. The most commonly used ultrasonic testing technique is pulse echo, wherein sound is introduced into a test object and reflections (echoes) are returned to a receiver from internal imperfections or from the parts geometrical surfaces.Figure5 Figure illustrating the basic concept of Ultrasonic Testing (11)The principle behind UT is that high frequency sound pulses from a transducer propagate through the test material, reflecting at interfaces. Most materials can be examined if sound transmission and surface finish are good and shape is not complex. UT provides precise, hig h-sensitivity results quickly. Thickness information, depth, and type of flaw can be obtained from one side of the component. (1)Work to dateAs suggested by the project plan, the entire duration of the project is distributed variably as required by different tasks commencing from the basic research and reading. According to the project plan the research was done on few NDT techniques and some of the techniques are still under research, along with types of methods and its techniques.Necessary Future WorkA more detailed and precise study of non destructive testings in aero industry is to be done. Project requires identifying various testings in Aerospace industry. A detailed study should be done on techniques and testings of NDT in Aerospace industry. A precise study of industrial applications and research should be done on optical methods. Key components of an aircraft should be identified and finally components may be tested by appropriate NDT methods. The main project work to be do ne is perform a Dye Penetrant Testing to identify cracks on gear. Dye penetrant inspection(DPI), also calledliquid penetrant inspection(LPI) orpenetrant testing(PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials.The main steps in Liquid Penetrant Inspection which are intended to be performed on the gear may bePre-cleaning The test surface is to be cleaned to remove any dirt, paint, oil, grease or any loose scale that could keep the penetrant out of a defect.Application of Penetrant The penetrant is to be then applied to the surface of the item which is to be tested.Excess Penetrant Removal The excess penetrant is to be then removed from the surface.Application of Developer After excess penetrant has been removed a white developer is to be applied.Inspection The inspection is to be done using visible light with adequate i ntensity for visible dye penetrant.Post Cleaning The test surface is then to be cleaned after inspection and recording of defects.SummaryIt is clear that NDT has advantage from other inspection techniques as it does not make any changes to the article. It is a highly-valuable technique that can save both money and time in product evaluation, troubleshooting, and research. NDT is very useful in order to detect cracks in materials of magnitude in micrometers. (2)Its aerospace application includes detection of cracks caused due to corrosion, fatigue and their synergistic interactions. Crank shafts, frames, flywheels, crane hooks, shaft, steam turbine blades and fasteners are some of the components which are more vulnerable to fatigue so stock inspection is necessary via NDT method. Typical components which are inspected using NDT method by manufacture in order to maintain quality are turbine rotor disc and blades, aircraft wheels, castings, forged components and welded assemblies. One of the NDT methods is Eddy current technique which can be used to check tube, bar and wire and also this method is automatic and highly sophisticated.(3)It can be said that NDT method has to be carried out in order for the aircraft to operate safely during service time and avoid any inadvertent damage due to fatigue and corrosion.(2)In this report, a detailed explanation of NDT testings and techniques are explained. The uses of NDT in different industrial applications are explained and a precise study on optical methods is done. According to the project plan, next task would be to conduct research on NDT applications.List of TablesTable1 Table showing a list of some of the key events in the chronology of NDTList of figuresFigure1 Figure illustrating a simple Penetrant testingFigure2. Figure illustrating the basic concept of Magnetic Particle TestingFigure3 Figure illustrating Eddy Current TestingFigure4 Figure illustrating the basic principle of Radiographic TestingFigure5 Figure illustrating the basic concept of Ultrasonic Testing
Monday, June 3, 2019
How Global Is The Global Media?
How Global Is The Global Media?With the emergence of orbiculateization, it has enhanced digital communication theory between suppliers and consumers and flourished the commercial-grade media market. However, argon these media systems developing a sincerely yours globular market? Are they communicating with the public in a truly global perspective versus transnational, national, regional and local? (Martin, 1988, pp 40)In the twentieth century, global media simply content technology/digital media, the internet is known as our global village where in initialiseion and communications can reach thousands homes in spite of geographical and cultural distances. Being global means getting internationally united and integrated through interchanging of foundation views.During the 1960s and 1970s, globalization primarily refers to the evolvement of Americanization, firms that be originally based in the unify States started moving across the globe in a rapid pace. (McChesney, 2001) Sinc e the United States market is already well-developed and only proveking for incremental expansion, these dominant firms aim to invest in the foreign markets so as to strengthen their competitiveness amongst new(prenominal) powerful national corporations. (McChesney, 2001)Unsurprisingly, these American firms baffle become the dominant players in the commercial media market after the 1990s, the concentration of specific media industries such as goggle box networks, Music industries, Film Makings, Books and Magazines publishing, are gradually increasing since dominant parent companies began to set up subsidiaries across the globe. In the twenty-first century, the global media market is basically dominated by s charge transnational corporations which are based in America Disney, AOL Time Warner, Sony, News Corporation, Viacom, Vivendi and Bertelsmann. (McChesney, 2001) And according to McChesneys findings (2001), these companies own the major U.S. film studios, champion of the U.S . television receiver networks, most of TV channels in U.S. and worldwide, they even control up to 85% of the global music market. By all accounts, does a truly global media market include such a high level of media concentration?Scholars on globalization and cultural equality argued that the American dominance in the media industries has made it difficult for other developing countries to produce and distribute their own form of cultural media products and has limited the degree of cultural exchange between global countries. On the other hand, Morley (1996, pp37) believes that Americanization, also refers to media/ cultural imperialism, is just the side effect or process of globalization. He explains that in long run, the U.S. is striving to emerge a set of values and beliefs which largely shares amongst all nations through media. Media plays a significant role in doting the word of mouth and is redefining the way the global communicates (Morley, 1996, pp54) The menses of media communications can be multilayered, in this case, the U.S. is just taking the lead, media is going to wide spread across the globe layer by layer (local, regional, nation, transnational, multinational and global).Cultural media ImperialismA global media system supposed to be influential and powerful enough to mediate nations (organizations, groups and individuals) to communicate their differences and similarities through cultural exchange.However, Straubhaar (1991) has identified some(prenominal) key problems regarding the media flow in the 1970s media and cultural imperialism. The spread of commercial media was seen to have constrained the distribution of media and its usage to a purely national basis. The media was sensed to be a one way flow of television and news from western countries like United States and France and the big four news agencies (Associated labor, United Press International, Agence France Presse and Reuters) respectively, to the rest of the world. (Straubhaar , 1991) Straubhaars concept of asymmetrical inter dependance (1991) is able to explain the imbalanced set of relationships, where the original media flow of the world displays first world countries at the top, and troika world at the bottom.It is very ironic to say that media/cultural imperialism is one of the stages to go through in the journey to media globalization. McChesney points out that the contemporary American gardening is the most powerful and influential in history. The unequal distributions of income, the lack of industrial infrastructure, lack of government support and media resources in the third world countries (i.e. India and parts of Africa) non only have constrained them from creating their own media channels, it has also increased their dependency on the U.S for capital, technology and most media products. (2001) In the notion of global media, it encourages opening up to the world, sharing and exchanging instead of protecting your own acculturation however, the dominant media coverage and financial and technologically lagging behind of the third world have even caused small countries to lose their cultural identity. (Morley, 2006, pp34)Living in a capitalist fellowship, it is understandable for companies to be profit oriented profits became the motor force to jampack the expansion of U.S. media into international sales and investment. Nonetheless, according to Strabhaars findings, audiences preference is as well considered to be a key factor in producing socially determined television readings. (1991) For instance, the massive distribution (exports) of American global films has successfully promoted the U.S. culture and spread knowledge about the Americans to the world. Furthermore, multinational audiences choice of reading has been assimilated to the American style/layout/format media productions (especially films and dramas). (Martin, 1988, pp52) The international success of the U.S. media industries has flourished the media market in other European countries such as Britain, North American, Mexico etc. (Martin, 1988, pp 54)Matter fact that the American influence is liberal way to the development of media industries in the third world. These firms are learning to take the first world models, and adapting it to their native settings such as developing non main menstruum media which is more scotchal. (Straubhaar, 1991) checkly, in less than ten years after the Americanization period, brazil nut already owned its national radio station and theatre India got its own community television channel Egypt started its national media industry by introducing a new cinema and opera theatre. (Martin, 1988, pp 52)Cultural proximity and hybridisationUnder the U.S. influence, media industries in Brazil tend to have adapted the American form of commercial media and cultural industry. Telenovela has been considered a distinct cultural industry product of Brazil since 1970s. (Straubhaar, 1991) Morley said that it is often b eing categorized as American style soap operas since it is translated from soap operas to Latin American by some Brazilian Americans. The Rich Also call off is the first telenovela that went global which is exported to China, Russia, France, Malaysia, Japan and the U.S. etc. (2006 pp 43) The nature of cultural linguistic markets helps develop cultural proximity within regions more than the mass imported U.S. programs. (Movius, 2010) Telenovela helps spread sociocultural messages worldwide. Small communities like the Hispanic people who share similar cultural norms with the Americans and Brazilians, are attracted to watch Brazils telenovela even some of them are living in east Asian countries. (Movius, 2010)Straubhaar argues that even though some countries are sharing a similar culture or a common language, there are many media products, especially television programs being locally transplanted before they enter a local market (1991) It is also very less likely to see pure imported media programs since the local audience usually prefer programs that are most proximate to them in terms of format, style, culture, tradition, custom and dialect. (Movius, 2010) Take for example, the Disney cartoon characterization will be translated to Chinese when it enters the Chinese film industry, all the American slangs and jokes will not be presented in the same way or essence since they cannot make any sense in Chinese. Regardless of the movies origin, viewers will interpret tem according to their cultural context and portrait it in their own urban lifestyle. (Morley, 2006, pp 35)To a certain extent, it is nearly impossible to assimilate worldwide cultures to one or else small nations will lose the unique aspects of their home, culture and environment. (Straubhaar, 1991) The global media means to enhance the exchange of cultural ideas, knowledge and values instead of overtaking others cultural image and identity. The success of Brazilian telenovela is considered as a combi nation of genre traditions and exchange of cultures between nations through media production.With reference to Martin (1988, pp 51), contraflow describes how the cultures interact and transform, without losing their own genres. Also, the exportation of telenovela Ugly Betty to the U.S. from Colombia is seen to be a great example of contraflow media, it proves that there is no long-lasting a one way flow of media from the America. (McChesney, 2001)Initially, it represents a dependency upon the first world but succeeds in moving into a greater, but still asymmetrical interdependency. (McChesney, 2001)Cultural difference is no longer a communication barrier in the globalized world. The global media has broaden audiences social horizon as various media work on them new and compelling cultural knowledge. Mass media like radio, cinema and television has reconsolidated social groupings (closed cosmopolitan groups) and renewed cultural forms. (Movius, 2010) Apart of the Hollywood product s from U.S., new layers of global production and access have emerged such as the worldwide flow of telenovela, Japanese anime and manga, Chinese Kung Fu films and Bollywood films. (Movius, 2010)It is not surprised that globalization is often associated with Americanization the U.S. has then written the grammar of television and film production. Yet, starting from the 1990s, the global power has shifted to Asia. (Movius, 2010) Recently, the U.S. and Chinese film industries announced that they are going to set up a Hollywood co-production film studio based in Tianjin, China. (Pulver, 2012) At such, China would be able to nurture opportunities for cross cultural creativity and business investment in the future. This project also allows China to offer its rich heritage culture to the world.Asian countries seem to be turning the original imperialistic U.S. chain on its head in the 2010s, (McChesney, 2001) South Korea is a prime example of a turn of influential media flow and showing the crucial role of advancing technology. The KPOP (Korean music) culture favours a massive number of foreign listeners Record companies encourage songs that combined Korean lyrics with rapped breaks and slogan-scaled English choruses, some of them even produce Japanese or Chinese song albums to attract the foreign market.In regard of the advance technology, the internet cannot be neglected as it is the most powerful and influential media that bridge communications amongst the global audience. It is known as the global village, the motor force that drives all nations together at once regardless of time and place. (Martin, 1988, pp 45) Social media like YouTube, Facebook, Twitter, MySpace takes on the job of the mass media to globalize peoples identity but in a larger degree, through an interpersonal space. These new global media players continue to grow which have also strengthen social relationships as well as increased accessibility to global information. (Movius, 2010)However, ident ities and media relations are still multi-layered with cultural geographical elements (McChesney, 2001) According to Straubhaar (1991), there are tendencies that the communication of media networks will be effected by cultural media traditions and regulatory systems. For instance, Facebook is censored in China due to some policy-making reasons. At the same time, the Chinese media has developed their own social networking sites that function like Facebook Weibo and RENN. This act has again challenged the notion of global media, showing that there are still countries which want to protect their domestic media and cultural industries to some point. (Straubhaar, 1991)As a conclusion, there is an initial change in the world media relations from dependence to relative interdependence. Though the United States still make up a high percentage of media ownership worldwide, other national media industries are consolidating an independent military post in the world media market. (McChesney, 2001) The question to media imperialism and power inequality within the global media system is still very complex due to some political, social, cultural and economic implications. The global media is trying to deliver the same message worldwide, however, there are others forces and causes influencing such process.
Sunday, June 2, 2019
Essay --
Join, or kick downstairs Rhetorical AnalysisLooking back in American chronicle, it is needless to interpret that there were many trials and tribulations that were overcome to achieve the freedom U.S citizens have today. In retrospect, it is astonishing how the colonists were oppressed by the British for more than a century and finally joined in concert with courage to revolt against them. This type of revolution would not have been alive if it were not for the art of rhetoric. Political icons in American history used rhetoric to stoke the wrath of colonists to revolt against the British. Founding Father, Benjamin Franklin, significantly used visual rhetoric to persuade the colonies to unite together with his starting time political cartoon entitled, Join, or Die, which was published in the atomic number 91 Gazette in 1754. Benjamin Franklin used his credibility to establish a well-crafted rhetorical illustration, in which its symbolization, initials, and caption all play an a ctive role in the ground breaking drawing, which changed the minds of colonists towards the pursuit of freedom that is exercised today. Benjamin Franklins reputation during this time is what fuel Join, or Die to be more than just a drawing. He contributed many scientific inventions as well as insightful publications to society. His contributions earned him the credibility and reputation for being an intelligent individual. Join, or Die was the first political cartoon to be published in a newspaper like the Pennsylvania Gazette, indicating that impacted drawings such as this were not familiar to the public yet. Due to Franklins positive and respectful ethos, this political cartoon was taken with more consideration, sooner of being tossed off as a mediocre sketch in a newspape... ... towards the colonies that are individually recognized. The failure to independently recognize each of the long dozen colonies in their own respect hinders his degree of persuasion towards his audience . Although there were snags in Benjamin Franklins political cartoon, it nevertheless accomplished its goal of persuading the colonists to band together as a harmonized force against the British for freedom. It is undeniable that Benjamins Franklins rhetorical methods were successful in his political cartoon, Join, or Die. The visual captured the minds of many colonists and led them towards the idea of revolution, and it is still appreciated today. Although there were drawbacks in the illustration, it nevertheless accomplished persuasion, and it is one of the many contributions that pushed colonists into fighting for the freedom that is exercised in America today.
Saturday, June 1, 2019
Cambodian American Essays -- Immigration, Southeast Asia
Introduction- Beauty and Darkness Kampuchean is one of the newest influxes of immigrants from Southeast Asia. The sweetheart and the darkness of Cambodia imprinted in level. Cambodia, a country of fertile land and dotted rice fields, of famous and breath taking monuments and quaint temples, of arts and crafts, cultural attractions, and virtually definitely a fib like no other. This is the country that exhibits one of the seven wonders of the world- that is the famous Angkor Wat. Angkor Wat, the largest religious monument that had ever built, significantly in Cambodia. This ancient ruin attracts millions of tourist from all over the world.Unfortunately, set aside all of those captured beauty that Cambodia has, at one point in time in its history darkness devoured this fragile nation and turned it upside down. This peaceful nation was once ruled by the French as part of French Indochina. With the struggled that Cambodian government undertaken to restore balanced and granting their nations independence back from the European colonization, they paid a price. The years of sad and worn out history of this nations corrupt government, turmoil, and followed by years of civil war thus making them in a state of dire emergence. Furthermore, with their bordering neighbors war, Vietnam, with the United States, Cambodia was slowly dragged into the state of darkness during the Nixon Administration. The Nixon administration conducted secret bombings in Cambodia in the early 1970s because Vietnam forces had their bases camped in the Cambodian province. As a closure of this misleading casualty, it led to the rise of the Khmer Rouge leader, Pol Pot. His influence gained many fellow native supports in Cambodia. Pol Pot and his entourage brought ... ... occupations are at 17.8%. Sales and office occupations are at 23.5%. Farming, fishing, and forestry occupations are at 0.5%. Construction, extraction, and maintenance occupations are at 5.5%. Lastly, production, transportation , and material moving occupations are at 36.8% (Cambodian America Census, 2000). The educational level consists in the 2000 census report for Cambodian Americans. About 37.3% are attending grade initiate and to the 9th grade level. The next level is high school with a diploma or none is about 16.1%. On the other end, about 46.8% are of high school graduates. Moreover, about only 13.4% are in college or are attending universities. Degrees obtained are the Associate degrees are at 5.2%, bachelors degrees are at 6.9%, and last but not to the lowest degree of the Graduate or professional degrees are about 2.3% (Cambodian America Census, 2000).
Subscribe to:
Posts (Atom)